Our Mold Remediation Process in Andover

We attack the source of mold at the molecular level.

Dealing with indoor mold can be stressful for many homeowners, which is why it’s so important to have experts you can rely on for effective treatment. At Green Home Solutions in Andover, we’ll always guide you through every step of the mold remediation process, so you know what we’re doing to rapidly and effectively get any mold problems under control. 

a relaxing lady after our mold remediation process in Andover

With our mold remediation process, we’re able to provide treatments that are fast-acting and cost-effective in Andover. We target mold growth while also addressing any underlying sources such as moisture or lack of ventilation. This allows us to prioritize long-term solutions for mold and other air quality issues. 

With mold remediation from Green Home Solutions, you’ll get powerful treatments that don’t introduce harsh or high-toxicity contaminants into your indoor air. We use proprietary sprays that immediately break down mold spores in the air and on interior surfaces, for a healthier, more breathable indoor environment. 

What to Expect from Our Mold Remediation Process in Andover

  • Testing to establish scope. Detailed mold testing allows us to map out where molds spread inside your property, how far it’s progressed, and why it began appearing. Your Green Home Solutions representative will complete a thorough inspection, even taking samples for further testing if needed.
  • Personalizing our approach. With the results of testing, we can formulate strategies to comprehensively and rapidly treat indoor mold. We’ll always take the time to go over these strategies with you, including any costs for remediation and any recommendations for moisture control.
  • Remediation of affected areas. While every treatment varies based on a property’s unique mold issues, our underlying mold remediation process carefully follows the guidelines of the EPA and other mold remediation protocols. For Andover area properties, treatment can often take five days or less.
  • Post-remediation confirmation. Once treatment has been completed, we always encourage homeowners to get mold testing again. These results can give you proof that mold has been completely taken care of. We can complete inspection, or recommend a third-party service.

With Green Home Solutions, services are available in Andover as well as Peabody, Chelmsford, Haverhill, Danvers, and Reading. You’ll always get a mold remediation process that uses long-lasting solutions to preserve your home and the respiratory environment of those who live in it. 

Have questions about our mold remediation process in Andover? Just ask our team at Green Home Solutions—call (978) 728-3441.

How Our Mold Remediation Process Works

Visual mold assessment and air quality test

First, we visually inspect for moisture and water intrusion using infrared detection technology. Then, if appropriate, we will take air and/or surface samples to check for mold spores, following the Indoor Environmental Standards Organization mold testing methods and procedures. Remember, you cannot rely on what you see or smell to ascertain the presence of mold! Finally, we submit our samples to an independent microbial laboratory for a comprehensive analysis.

Customized Mold Remediation Strategy

The air quality test identifies the mold, the concentration level of mold spores, and the extent of contamination. Based on the results, we will formulate a specific, personalized plan for your home, including a quote for mold remediation if appropriate. We will discuss the situation with you and explain our recommended strategy so that you understand what will be done.

Fungal Eradication Treatment

Our licensed and/or certified technicians utilize a multifaceted approach to restore a building’s indoor environment to a state of normal fungal ecology. While specific protocols may vary from project to project, the underlying basis follows guidelines from the ANSI/IICRC S520 and EPA. Using our proprietary EPA registered product, we can restore and preserve more building materials than conventional remediators. Our approach is direct, fast-acting and highly effective. Your home or office will be restored to a fresher and more breathable space because we never use harsh chemicals!

Post-Treatment Testing

Our mold remediation process is considered complete once an optional post-treatment test confirms the cleanliness and purity of your air. We are happy to arrange for a third party to collect an air quality sample to give you that additional peace of mind.

mold on wall

When you think you have mold in your home or office, call Green Home Solutions, the company you can trust to resolve contamination issues at the source. We’ll help you breathe better, feel better, be better… because we make air better!

Call 1-800-SOLUTIONS to reach your local Green Home Solutions provider today to learn more about our mold remediation process.

Green Home Solutions vs. Competitor

Green Home Solutions Competitor
Green Leaf Icon
Contains plant based enzymes.
Biohazard Chemicals Icon
Most are synthetic chemicals.
Green Fan Icon
Catalytic, keeps on working.
Radioactive Icon
Very reactive. Energy used up instantly.
Green Cog Icon
Breaks down allergenic proteins in spores.
Smiley Sad Icon
Green Bright Icon
Fine spray application reaches everywhere.
Smiley Sad Icon
Green Stop Icon
Helps prevent growth.
Smiley Sad Icon
Indoor Air Quality

Indoor Air Quality

Our EPA registered product is made using plant-based ingredients and kills mold and its suspected harmful effects.



Often, there is no need for expensive demolition, so we are usually 50-75% less costly than our competitors.



We complete the process quickly — on average in 2-5 days.



Our products create a clean indoor environment by cleaning and killing airborne impurities — wherever they may hide.