Our Mold Remediation Process in Danbury

We attack the source of mold at the molecular level.

Removing mold can be a tricky process if you are not trained and certified to do so. This is why it is important to trust the professionals at Green Home Solutions to manage every step of the mold remediation process for your Danbury area home or office. 

What most people do not realize is that mold is not just what you see or smell. Often times, the most harmful molds are invisible and odorless. Our certified inspectors are experts in diagnosing the source of the mold issues by using the latest equipment and technology. Mold is not just in the air and on the surface, mold has deep roots and branches called hyphae which gets into the sub surface. At Green Home Solutions, we have proprietary products that can break down the mold at a molecular level which often eliminates the need for using harsh chemicals.    

What to Expect from Our Mold Remediation Process in Danbury

  • Pre-remediation inspection. First, our ACAC Board Certified mold inspectors will conduct a thorough assessment of the attic, crawlspace, basement, or living space that may have the mold issue. A visual inspection will be completed and testing can be conducted if necessary.   
  • A customized, rapid-response plan. After the assessment is completed, a custom detailed scope of work will list the steps necessary to complete the mold remediation. This strategic approach allows us to rapidly address any areas that have been affected by mold before it spreads further.
  • Rigorous mold remediation. Our inspectors will use a process shaped by guidelines from the EPA, ANSI/IICRC S520, and other agencies. With great attention to detail, we will ensure that proper containments are constructed to assure that cross contamination does not spread to adjacent areas. 
  • Post-remediation inspection. After mold remediation, we often will collect a mold sample to measure our performance. This will save you time and money if additional work is needed. If you choose to get an optional third party mold test, we always guarantee it will pass.    
a relaxing woman after using our mold remediation process in Danbury

For properties with mold in Danbury, Southbury, Brookfield, New Fairfield, New Milford, and Ridgefield, Green Home Solutions can help. When you choose our mold removal services, you’re getting quality that’s been time-tested and scientifically verified.

We know how important it is to get healthy, clean air. For mold remediation, we don’t need to use high-toxicity contaminants or hazardous treatments to get the job done and we will leave your air cleaner than when we started. 

When you’re looking for a mold remediation process in the Danbury area that offers powerful results, we can help. Learn more about our treatments by calling Green Home Solutions at (203) 628-2227

How Our Mold Remediation Process Works

Visual mold assessment and air quality test

First, we visually inspect for moisture and water intrusion using infrared detection technology. Then, if appropriate, we will take air and/or surface samples to check for mold spores, following the Indoor Environmental Standards Organization mold testing methods and procedures. Remember, you cannot rely on what you see or smell to ascertain the presence of mold! Finally, we submit our samples to an independent microbial laboratory for a comprehensive analysis.

Customized Mold Remediation Strategy

The air quality test identifies the mold, the concentration level of mold spores, and the extent of contamination. Based on the results, we will formulate a specific, personalized plan for your home, including a quote for mold remediation if appropriate. We will discuss the situation with you and explain our recommended strategy so that you understand what will be done.

Fungal Eradication Treatment

Our licensed and/or certified technicians utilize a multifaceted approach to restore a building’s indoor environment to a state of normal fungal ecology. While specific protocols may vary from project to project, the underlying basis follows guidelines from the ANSI/IICRC S520 and EPA. Using our proprietary EPA registered product, we can restore and preserve more building materials than conventional remediators. Our approach is direct, fast-acting and highly effective. Your home or office will be restored to a fresher and more breathable space because we never use harsh chemicals!

Post-Treatment Testing

Our mold remediation process is considered complete once an optional post-treatment test confirms the cleanliness and purity of your air. We are happy to arrange for a third party to collect an air quality sample to give you that additional peace of mind.

mold on wall

When you think you have mold in your home or office, call Green Home Solutions, the company you can trust to resolve contamination issues at the source. We’ll help you breathe better, feel better, be better… because we make air better!

Call 1-800-SOLUTIONS to reach your local Green Home Solutions provider today to learn more about our mold remediation process.

Green Home Solutions vs. Competitor

Green Home Solutions Competitor
Green Leaf Icon
Contains plant based enzymes.
Biohazard Chemicals Icon
Most are synthetic chemicals.
Green Fan Icon
Catalytic, keeps on working.
Radioactive Icon
Very reactive. Energy used up instantly.
Green Cog Icon
Breaks down allergenic proteins in spores.
Smiley Sad Icon
Green Bright Icon
Fine spray application reaches everywhere.
Smiley Sad Icon
Green Stop Icon
Helps prevent growth.
Smiley Sad Icon
Indoor Air Quality

Indoor Air Quality

Our EPA registered product is made using plant-based ingredients and kills mold and its suspected harmful effects.



Often, there is no need for expensive demolition, so we are usually 50-75% less costly than our competitors.



We complete the process quickly — on average in 2-5 days.



Our products create a clean indoor environment by cleaning and killing airborne impurities — wherever they may hide.