Our Mold Remediation Process in Fairfield

We attack the source of mold at the molecular level.

Getting rid of a mold problem should always be left to the professionals. Improper mold remediation can lead to cross contamination in your home or office that can even get into the air system. The experts at Green Home Solutions are board certified so you can be confident that the mold is found at it’s source and it will be killed and removed properly. Our certified inspectors use the latest training, equipment, and technology to accurately diagnose the cause of the mold and create a plan to remove it quickly, effectively and affordably in your Fairfield county home. 

Our goal isn’t just to address mold, it’s to restore the indoor environment to the cleanest indoor air quality possible. With our mold remediation process, we never work with toxic chemicals or other contaminant-heavy products. Green Home Solutions uses powerful EPA registered proprietary products that kill and break down mold and microtoxins at the molecular level.  

What to Expect from Our Mold Remediation Process in Fairfield

  • Comprehensive testing. Our ACAC-certified structural mold inspectors will first do a comprehensive visual inspection for mold and moisture. Mold is not just on the surface. It gets airborne and it has roots and branches called hyphae which get deep into the sub surface. Mold can also get into the adjacent rooms and the air system. If necessary, our inspectors will capture air and surface samples and send them to one of the countries best accredited labs for analysis. Determining how far mold has spread takes the guess work out of the remediation plan keeping us from over or under remediating. You can’t always find mold by sight or smell alone, which is why thorough expert testing can be so important. 
  • An action plan for treatment. After a comprehensive inspection and assessment, we use the data to create a custom remediation plan that addresses all of the mold and the sources that caused it. Our Inspectors work hand-in-hand with our certified crew and technicians to assure nothing is missed or over looked. 
  • Mold remediation that lasts. Once the mold is properly removed, it can only return if the area continues to have conditions that promote mold growth. Green Home Solutions will make the recommendations necessary to keep moisture from coming back in your attic, crawlspace, basement or living area. While every job is a little different, especially in Fairfield County, we rely on the guidelines from the ANSI/IICRC S520 as well as the EPA to make sure that we are compliant with any state laws or regulations.
  • Confirmation that it worked. When it comes to mold growth, peace of mind is key. We offer an optional post-remediation inspection to confirm that our services were a success at no charge. We also always guarantee passing third party testing.
a relaxing woman in a clean home after our mold remediation process in Fairfield

At Green Home Solutions, we treat houses, rental properties, office buildings, and other properties in Fairfield and the surrounding area. Our mold remediation process is ideal for property owners in Trumbull, Norfolk, Westport, and Shelton who are looking for effective, powerful and lasting results.  

We’ll never use high-toxicity ingredients to treat your home. We always strive to leave indoor air quality cleaner than when we started. With our services, you get an approach that prioritizes long-term, high-impact results.  

For homeowners in Fairfield County, use a mold remediation process you can trust to work. If you think you might have mold growth, call Green Home Solutions to speak to a representative: (203) 628-2227

How Our Mold Remediation Process Works

Visual mold assessment and air quality test

First, we visually inspect for moisture and water intrusion using infrared detection technology. Then, if appropriate, we will take air and/or surface samples to check for mold spores, following the Indoor Environmental Standards Organization mold testing methods and procedures. Remember, you cannot rely on what you see or smell to ascertain the presence of mold! Finally, we submit our samples to an independent microbial laboratory for a comprehensive analysis.

Customized Mold Remediation Strategy

The air quality test identifies the mold, the concentration level of mold spores, and the extent of contamination. Based on the results, we will formulate a specific, personalized plan for your home, including a quote for mold remediation if appropriate. We will discuss the situation with you and explain our recommended strategy so that you understand what will be done.

Fungal Eradication Treatment

Our licensed and/or certified technicians utilize a multifaceted approach to restore a building’s indoor environment to a state of normal fungal ecology. While specific protocols may vary from project to project, the underlying basis follows guidelines from the ANSI/IICRC S520 and EPA. Using our proprietary EPA registered product, we can restore and preserve more building materials than conventional remediators. Our approach is direct, fast-acting and highly effective. Your home or office will be restored to a fresher and more breathable space because we never use harsh chemicals!

Post-Treatment Testing

Our mold remediation process is considered complete once an optional post-treatment test confirms the cleanliness and purity of your air. We are happy to arrange for a third party to collect an air quality sample to give you that additional peace of mind.

mold on wall

When you think you have mold in your home or office, call Green Home Solutions, the company you can trust to resolve contamination issues at the source. We’ll help you breathe better, feel better, be better… because we make air better!

Call 1-800-SOLUTIONS to reach your local Green Home Solutions provider today to learn more about our mold remediation process.

Green Home Solutions vs. Competitor

Green Home Solutions Competitor
Green Leaf Icon
Contains plant based enzymes.
Biohazard Chemicals Icon
Most are synthetic chemicals.
Green Fan Icon
Catalytic, keeps on working.
Radioactive Icon
Very reactive. Energy used up instantly.
Green Cog Icon
Breaks down allergenic proteins in spores.
Smiley Sad Icon
Green Bright Icon
Fine spray application reaches everywhere.
Smiley Sad Icon
Green Stop Icon
Helps prevent growth.
Smiley Sad Icon
Indoor Air Quality

Indoor Air Quality

Our EPA registered product is made using plant-based ingredients and kills mold and its suspected harmful effects.



Often, there is no need for expensive demolition, so we are usually 50-75% less costly than our competitors.



We complete the process quickly — on average in 2-5 days.



Our products create a clean indoor environment by cleaning and killing airborne impurities — wherever they may hide.